Continuing Education & Training

This class provides a comprehensive introduction to Pressure Regulating Devices (PRDs) in the fire protection industry, focusing on their purpose and common applications. Participants will explore key definitions and concepts essential to understanding PRD functionality and usage. The class delves into the installation requirements outlined in NFPA standards covering PRDs and related system components. Attendees will also learn practical installation techniques to address common challenges and ensure proper setup. Additionally, this class addresses acceptance testing procedures and ITM requirements for systems equipped with these types of devices. At the conclusion of this class, attendees will gain understanding into installation, troubleshooting, and testing of PRDs and the critical role they have in system performance.

District 7

June 7, 2025
8:00 am
Holiday Inn Mobile Airport
3630 Springhill Memorial Drive S
Mobile, AL 36608

District 8

May 17, 2025
8:00 am
Mechanical Trades Institute
6120 Purdue Dr.
Atlanta, GA 30336

District 9

June 28, 2025
8:00 am
Engineers Local 9
1833 Hwy. 305 N
(exit 52 off I-75)
Niota, TN 37826
 

This class provides a comprehensive introduction to Pressure Regulating Devices (PRDs) in the fire protection industry, focusing on their purpose and common applications. Participants will explore key definitions and concepts essential to understanding PRD functionality and usage. The class delves into the installation requirements outlined in NFPA standards covering PRDs and related system components. Attendees will also learn practical installation techniques to address common challenges and ensure proper setup. Additionally, this class addresses acceptance testing procedures and ITM requirements for systems equipped with these types of devices. At the conclusion of this class, attendees will gain understanding into installation, troubleshooting, and testing of PRDs and the critical role they have in system performance.

District 12

May 17, 2025
8:00 am CST
Holiday Inn Paducah Riverfront
600 North 4th St.
Paducah, KY 42001
*6 Hrs. Con Ed*

This class provides a comprehensive introduction to Pressure Regulating Devices (PRDs) in the fire protection industry, focusing on their purpose and common applications. Participants will explore key definitions and concepts essential to understanding PRD functionality and usage. The class delves into the installation requirements outlined in NFPA standards covering PRDs and related system components. Attendees will also learn practical installation techniques to address common challenges and ensure proper setup. Additionally, this class addresses acceptance testing procedures and ITM requirements for systems equipped with these types of devices. At the conclusion of this class, attendees will gain understanding into installation, troubleshooting, and testing of PRDs and the critical role they have in system performance.

District 19

September 27, 2025
8:00 am
Training Center
3651 California Rd.
Orchard Park, NY 14127

This class provides a comprehensive introduction to Pressure Regulating Devices (PRDs) in the fire protection industry, focusing on their purpose and common applications. Participants will explore key definitions and concepts essential to understanding PRD functionality and usage. The class delves into the installation requirements outlined in NFPA standards covering PRDs and related system components. Attendees will also learn practical installation techniques to address common challenges and ensure proper setup. Additionally, this class addresses acceptance testing procedures and ITM requirements for systems equipped with these types of devices. At the conclusion of this class, attendees will gain understanding into installation, troubleshooting, and testing of PRDs and the critical role they have in system performance.

District 21

May 31, 2025
8:00 am
Local 44 Plumbers & Pipefitters 
3915 East Main Ave.
Spokane, WA 99202
*5 Hrs. Con Ed*


District 22

May 15, 2025
8:00 am
Union Pipe Trades Training Center
8616 Cuyamaca St.
Santee, CA 92071
*5 Hrs. Con Ed*

District 24

May 17, 2025
8:00 AM CST
Plumbers & Pipefitters Training Center
5315 S. Shartel Avenue
Oklahoma City, OK 73109

This class provides a comprehensive introduction to Pressure Regulating Devices (PRDs) in the fire protection industry, focusing on their purpose and common applications. Participants will explore key definitions and concepts essential to understanding PRD functionality and usage. The class delves into the installation requirements outlined in NFPA standards covering PRDs and related system components. Attendees will also learn practical installation techniques to address common challenges and ensure proper setup. Additionally, this class addresses acceptance testing procedures and ITM requirements for systems equipped with these types of devices. At the conclusion of this class, attendees will gain understanding into installation, troubleshooting, and testing of PRDs and the critical role they have in system performance.

District 27

September 27, 2025
8:00 am
Local 246 
1303 N. Rabe Ave.
Fresno, CA 93727
*5 Hrs. Con Ed*

This class provides a comprehensive introduction to Pressure Regulating Devices (PRDs) in the fire protection industry, focusing on their purpose and common applications. Participants will explore key definitions and concepts essential to understanding PRD functionality and usage. The class delves into the installation requirements outlined in NFPA standards covering PRDs and related system components. Attendees will also learn practical installation techniques to address common challenges and ensure proper setup. Additionally, this class addresses acceptance testing procedures and ITM requirements for systems equipped with these types of devices. At the conclusion of this class, attendees will gain understanding into installation, troubleshooting, and testing of PRDs and the critical role they have in system performance.

District 32

May 17, 2025
8:00 am
Mid-County Fire Protection 
184 North Business Route 5
Camdenton, MO 65020

District 37

May 3, 2025
8:00 am
Westmark Hotel
813 Noble Street 
Fairbanks,  AK 99701
*5 hours Con Ed*

District 40

September 28, 2025
8:00 am
UA Local 296 Hall
575 N Ralstin
Meridian, ID 83642

District 4

May 3, 2025
8:00 am
Pipefitters Local 208
6350 N. Broadway
Denver, CO 80216

May 31, 2025
8:00 am
Pipefitters Local 208
6350 N. Broadway
Denver, CO 80216

This class will be led by the regional Spears representative who will begin by explaining the proper material handling and storage of CPVC pipe and fittings. Next, will be an in-depth review of the manufacturer’s installation manual with a concentration on the steps required to properly join CPVC pipe and fittings. Following this discussion, the class will explore the different requirements involving hanging and supporting CPVC piping in real-world applications. The lecture will wrap up with a comprehensive overview of the best practices associated with CPVC piping installations. Following the classroom portion, the day will conclude with a hands-on element where once complete a Spears certificate of attendance will be issued.

District 11

February 08, 2025
8:00 am
Local 25 Training Center
4600 46th Ave.
Rock Island, IL 61201
*5 hrs. Con Ed*

The OSHA 30 hour safety class presentation will cover safety topics following the strict OSHA guidelines for the Construction Industry.  Upon completion of the class you will be able to recognize and avoid safety hazards on the job site. Requirements for receiving a completion card are attendance, attention, involvement, and completing a final exam.

This class will include an NFPA Standards review in the morning followed by the UA Star Sprinkler Fitter Exam. Successful completion of the exam qualifies you for the Iowa State Sprinkler Fitter Installers License. The Star is a requirement of the Iowa License. Every fitter on the job has to be licensed per the state.

Star Certification and Recertification tests will start at approximately 1pm to 4pm
Full certification exam $150.00 / Recertification exam $100.00
Class 9 and 10 apprentices who take the review class and test will be given credit towards training hours.

This is a hands-on class that allows students to works with Deluge, Dry and Pre-Action valves installed in a trailer. You will learn how each valve operates and learn trouble shooting techniques from our Instructors.